GE Ice Maker Crush... [Issues And Solutions] (2024)

Do you have a GE ice maker crush problem? Sometimes, an ice maker malfunctions and gets stuck in crush mode. But this article shows you how to fix it.

GE Ice Maker Crush... [Issues And Solutions] (1)

Table of Contents

GE Ice Maker Stuck On Crushed Mode – How to Fix

There are 2 methods you can use to fix a GE ice maker that is stuck on crushed mode.

Method 1

Follow the steps below to fix the ice maker:

Step 1

Open the freezer door.

Step 2

Lift and pull out the ice becket completely. Then, reinsert it.

Step 3

Shut the freezer door and give it time to re-commence the production of ice. Go to the display panel and reset it to ‘CUBED’.

This usually fixes the problem. However, if it does not work, try another method.

Method 2

Follow the steps below to fix the ice maker:

Step 1

Open the freezer door.

Step 2

Lift and pull out the ice bucket and empty the ice in it into a clean container.

Step 3

Check to see if any ice has dropped behind the ice bucket and into the lever. If you find any, remove the ice, and pour some warm water into the ice tray to dissolve any frozen ice in it.

See also KitchenAid Refrigerator Ice Maker Overflowing [Quick Fix]

Step 4

While at this, try to dispense ice without the bucket in position. Do this by shutting the door and pressing ‘ICE DISPENSER’ on the display panel.

If, after a while, there is no snap sound, it could mean that the refrigerator needs servicing.

Step 5

Pour the ice deposited in a clean container back into the ice bucket and reinsert it into position in the freezer. Afterward, shut the freezer door.

[amalinkspro type=”showcase” asin=”B005B4DULQ” apilink=”https://www.amazon.com/dp/B005B4DULQ?tag=refrigeratorsreviewed-20&linkCode=osi&th=1&psc=1″ new-window=”true” addtocart=”true” nofollow=”true” sc-id=”6″ img-sizes=”500:332″ imgs=”LargeImage” link-imgs=”false” specs=”” btn-color=”#ff9900″ btn-text=”Buy on Amazon” alignment=”aligncenter” hide-prime=”0″ hide-image=”0″ hide-price=”0″ hide-button=”0″ width=”600″]GE WR29X10097 Ice Bucket Assembly for Refrigerator[/amalinkspro]

Why Is My GE Ice Maker Stuck on Crushed Mode?

If your GE ice maker has been dispensing only crushed ice when the refrigerator’s display panel is indicating ‘CUBED”, it is likely that an iced cube has been trapped in the lever behind the ice tray.

The ice is obstructing the lever from opening a flap at the back of the ice tray to dispense only cubed ice.

Check out these other articles…

Frigidaire Refrigerator Compressor [Issues and Solutions]

Viking Refrigerator Compressor [Problems Solved]

Bosch Refrigerator Compressor [Problems and Solutions]

Electrolux Refrigerator Compressor Not Working [How to Fix]

Haier Refrigerator Compressor [Issues and Solutions]

Hotpoint Refrigerator Compressor [Problems Solved]

Why Is My GE Ice Maker Not Crushing Ice?

If you have a GE ice maker that is not crushing ice, there are a few possible causes of this…

1. Ice Maker Is Set to Cubed Mode

Check the display panel to confirm that the ice maker is not set to‘’CUBED’ mode. If it is, then press the ‘CRUSH’ button to set it to dispense crushed ice. If this does not solve the problem, you may try the next option.

2. Ice Bucket Is Improperly Inserted

If you don’t insert the bucket properly, it could result in the ice maker malfunctioning.

To correct this, carefully lift the ice bucket and completely pull it out of position. Then, re-insert it, slightly pushing it into position until you hear a soft snap sound.

It’s also necessary to consult your refrigerator’s manual to confirm how best to perform this task.

3. Ice Bucket Needs Cleaning

If you don’t use the ice in the bucket regularly, be sure to empty and clean the bucket and its environs biweekly.

Otherwise, it could result in ice shavings obstructing the proper functioning of the ice maker.

To clean the bucket, lift and pull it out from its default position. Then, empty it. Next, wash it thoroughly with clean water.

Dry the bucket thoroughly, making sure there is no leftover moisture, and re-insert properly into position.

4. Dispenser Chute Needs Cleaning

If you don’t use the dispensed ice in the bucket and ice keeps dispensing, eventually, the ice will form clumps.

Over time, pieces of ice will find their way into the chute of the dispenser and prevent ice delivery.

Therefore, pour warm water down the chute to clear any piece of ice stuck there. Also, clean the chute and the underneath the ice storage container. Thoroughly dry it before using it again.

5. There Is Ice Clustering

In temperate regions, there is likely to be an issue of clustered ice on the ice bucket. If this is the case, use a plastic or wooden spatula to break and dispose of some of the ice. If the ice is too strong, pour hot water over it.

See also Refrigerator Compressor Is Hot [Solutions]

Important Notes…

You may see some crushed ice mixed with cubed ice if you switch from crushed to cubed. This is completely normal and not a cause for worry.

Never attempt to use a sharp object to break the ice inside the refrigerator. This could cause serious and excessive damage.

If these fixes don’t work for a GE ice maker stuck on crush, find the nearest GE Appliances service center or contact them at products.geappliances.com

Get Instant Help — Ask An Experienced Verified Appliance Technician

Need expert help? Click here to use the chat box on this page to speak with a verified appliance technician right away. No need for expensive in-home service calls. No appointments. No waiting.

GE Ice Maker Crush... [Issues And Solutions] (2024)

FAQs

Why does my GE ice maker only make crushed ice? ›

If the refrigerator only dispenses crushed cubes, this means that your bar along the bottom of the bin is not being lifted. If you remove the bin you'll see the metal bar along the bottom of it which is used to change the ice dispenser from crushed to cubed.

How do you fix an ice maker that only makes crushed ice? ›

Pull the ice bin out and removed any clumped ice. Use warm water to melt any stuck ice, then dry the bin. Replace the bin, and allow your ice maker to make ice again, then try the dispenser.

Why is my ice coming out crushed? ›

A common cause of the ice maker dispensing crushed ice only is the freezer temperature being too cold. If the freezer temperature is too cold the ice will shatter when it is harvested from the ice maker. Raise the freezer temperature.

Why is my GE ice maker not dropping ice? ›

A clogged water filter can restrict water flow to the icemaker. Water filters should be changed every 6 months. If your refrigerator has a water filter, try replacing your water filter. You can purchase a GE Appliance genuine water filter online at our GE Appliances Parts & Accessories website.

Why is my ice maker making clumps of ice? ›

Is the ice maker used regularly? If ice is not used regularly, it could clump and fuse together. This is considered normal. Gently break the clumps up with a plastic utensil.

What causes hollow ice cubes from an ice maker? ›

Hollow or small ice cubes, along with slow is likely due to low water pressure. Connecting a refrigerator to a reverse-osmosis system could also lower the water pressure to the refrigerator, which will result in small ice cubes, low ice production or decrease amount of water being dispensed.

How do you clean a crushed ice maker? ›

Ensure the ice maker's efficiency with these cleaning steps: - For daily cleaning, Create a solution by diluting one teaspoon of household bleach with five cups of water. For monthly cleaning to remove mineral deposits, use white vinegar instead of the previous water solution.

Why do I keep eating crushed ice? ›

Craving and chewing ice, known as pagophagia, is often associated with iron deficiency, with or without anemia, although the reason is unclear.

Why does my ice maker make broken ice cubes? ›

Cause: Poor water flow to the ice maker may prevent the trays from filling completely, resulting in cubes that are small, hollow or oddly shaped. Solution: A handful of causes may contribute to poor water flow, but with each you can expect a relatively simple fix.

How does an ice maker make crushed ice? ›

As with a cube icemaker, a solenoid valve releases hot gas into the cooling pipes after a set length of time. This loosens the ice column so it falls into the ice crusher below. The ice crusher breaks the ice cylinder into small pieces, which pass on to a collection bin.

Where is the GE ice maker reset button? ›

Locate the reset button on the control panel of the refrigerator. Press and hold the button for 3- 5 seconds. Allow the ice maker to cycle through before attempting to dispense any ice.

Why is my ice maker making hollow ice? ›

Hollow or small ice cubes, along with slow is likely due to low water pressure. Connecting a refrigerator to a reverse-osmosis system could also lower the water pressure to the refrigerator, which will result in small ice cubes, low ice production or decrease amount of water being dispensed.

Why is my GE Profile ice maker not making ice? ›

If your ice maker stopped making ice, it could be due to a dirty or clogged water filter. Over time, the water filter can become clogged with impurities, reducing water flow to the ice maker. This can also be why your water and ice cubes smell or taste bad.

How do you increase ice production in a GE refrigerator? ›

Side-by-Side (GE, Profile and Café Series)

"Arctica Ice" buckets hold 10 lbs. of ice. Ice production can be increased by decreasing the Freezer temperature to -2 degrees Fahrenheit.

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Allyn Kozey

Last Updated:

Views: 5871

Rating: 4.2 / 5 (43 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Allyn Kozey

Birthday: 1993-12-21

Address: Suite 454 40343 Larson Union, Port Melia, TX 16164

Phone: +2456904400762

Job: Investor Administrator

Hobby: Sketching, Puzzles, Pet, Mountaineering, Skydiving, Dowsing, Sports

Introduction: My name is Allyn Kozey, I am a outstanding, colorful, adventurous, encouraging, zealous, tender, helpful person who loves writing and wants to share my knowledge and understanding with you.